One component pad or screen printing ink for printing on UNTREATED Polypropylene

This glossy, physically drying pad printing ink exhibits good mechanical and chemical resistance. The inks of T-25 are light fast, weather resistant and guarantee high opacity. 

The basic ink mixing system of series T-25 consists of 12 basic colors and can be used to mix a wide range of shades, including 22 standard opaque, ready to print colors. Practically tested mixing formulas are available for many different color standards, e.g. Pantone®, HKS, RAL, NCS etc.

The range also includes bronze shades and overprint varnishes for special applications.

Usage Instructions

Add 20% 100-VR-1260 Adhesion Modifier* prior to printing.
Pad Printing: Add 15-20% 100-VR-1370 Thinner
Screen Printing: Add 15-20% 100-VR-1379 Retarder
Curing: Air dry within 1 hour or exposure to heat at 180°F for 5 minutes

*May be ordered with the Adhesion Modifier pre-mixed since the pot-life is not diminished when added. When the AM has been added at the factory, the part number on the can will have the letters “AM” included.