Versatile one component pad or screen printing ink for multi-plastic printing

High-gloss, two-component screen printing ink for printing pretreated polyolefin (polyethylene, polypropylene), unplasticized PVC, PET and other plastic containers. Rapid drying, very good printability and good blocking and impact resistance are the key properties of these physically drying, reactive-curing inks. Ink series 700 ST is resistant to oils, fats, alcohol, wetting agents and solvents but has limited resistance to alcohol-containing fill products.

The basic ink mixing system of series 700-ST consists of 12 basic colors (G scale) and can be used to mix a wide range of shades, including 22 standard opaque, ready to print colors. Practically tested mixing formulas are available for many different color standards, e.g. Pantone®, HKS, RAL, NCS etc.

Usage Instructions

Pad Printing: Add 15-20% 38472 Thinner and 10-20% SE-5214 Hardener (see Applications Chart for details on when to use hardener)
Screen Printing: Add 15-20% #11 Retarder and 10-20% SE-5214 Hardener (see Applications Chart for details on when to use hardener)
Curing: Air dry within 1 hour, or heat at 175°F for 5 minutes