Two component epoxy system for pad or screen printing glass, metals and many plastic substrates

High-gloss, two-component screen printing ink for printing pretreated polyolefins (polyethylene, polypropylene), polyamide, polycarbonate, thermosets, glass, metal, wood, ceramics and other hard materials. Very smooth flow, good permanent flexibility and rapid touch/complete drying are the key properties of these physically drying, reactive-curing inks. Ink series 10 KK is resistant to oils, fats, alcohol, wetting agents, acids, weak alkalis and most solvents. It is not resistant to phenol-containing fill products.

 

The basic ink mixing system of series 10-KK consists of 12 basic colors (G scale) and can be used to mix a wide range of shades, including 22 standard opaque, ready to print colors. Practically tested mixing formulas are available for many different color standards, e.g. Pantone®, HKS, RAL, NCS etc.

The range also includes bronze shades and overprint varnishes for special applications.

Usage Instructions

Glass/Ceramic/Metals Printing

Pad Printing: Add 15-20% 35696 Thinner and 20% 100-VR-1286 Hardener
Screen Printing: Add 15-20% 38693 Retarder and 20% 100-VR-1286 Hardener
Curing: Heat at 300°F for 15 minutes

Plastic Printing

Pad Printing: Add 15-20% 38571 Thinner and 20% 37172 Hardener
Screen Printing: Add 15-20% 34392 Retarder and 20% 37172 Hardener
Curing: Air dry within 1 hour or exposure to heat at 180°F for 5 minutes